ELTEX SMG-2, Operation Manual, Page: 163 / 198

SMG digital gateway 163
an adaptive jitter buffer, in
milliseconds
jitter min <JT_MIN> 0-200 Set the size of a fixed jitter buffer or
the lower limit (the minimum size) of
an adaptive jitter buffer
jitter mode <JT_MODE> adaptive/non-
adaptive The mode of jitter buffer operation:
Adaptive —adaptive;
non-adaptive —fixed.
jitter vbd <JT_VBD> 0-200 Set a fixed buffer size for data
transmission in the VBD mode
max_active <MAX_ACTIVE> 0-65535 Set the maximum number of active
connections for an interface
mode <mode> SIP/
SIP-T/
SIP-I/E1-TRANSIT Set the interface operation mode (SIP
profile is assigned to SIP subscribers)
name <s_name> Allowed
characters: letters,
numbers,
"_";
31 characters max.
Set a name for SIP interface
net-interface rtp <IFACE_NAME> String,
255 characters
max. Set an RTP network interface
net-interface sig <IFACE_NAME> String,
255 characters
max. Set a SIP network interface
numbering plan <NUMPLAN> 0-15 Select a numbering schedule
password <PASSWD> String,
15 characters max. Set an authentication password
options <OPTIONS> enable/disable Enable the function that controls
direction availability by sending
OPTIONS messages; when a direction
is not available, the redundant trunk
group is used for the call. This
function also analyses the received
OPTIONS
message that allows
avoiding the use of the 100rel,
replaces, and timer features, which
are configured in this direction, in
case the opposite party does not
support them.
options period <OPTIONS_PERIOD> 30-3600 Set the time in seconds after which
the redundant trunk group will be
used for a call if the direction is not
available.
port <PORT> 1-65535 Set a UDP port of the communicating
gateway that is used for SIP signalling
reception
public_ip clear Remove a public IP
public_ip set <PUBLIC_IP> IP address in the
AAA.BBB.CCC.DDD
format Set a public IP to be used in SIP/SDP
messages
quit Terminate this CLI session
redirection 302 <REDIRECTION> on/off Enable/disable redirection (302)
redirection server <REDIRECT_SERV> on/off Redirect / do not redirect the call,
which was sent using a public
address, to the subscriber's private