ELTEX SMG-2, Operation Manual, Page: 151 / 198

SMG digital gateway 151
incoming long-distance calls instead of
the
" Subscriber ". At that, the
transmitted number should be as
follows: ABCabxxxxx, or 2abxxxxx, or
10 <international number>.
International umber —used in LD and
CLR lines for outgoing international
calls. At that, the transmitted number
should be as follows: <international
number> (without the international
network exit prefix—"10").
config Return to the Configuration menu
dial mode <MODE> nochange/enblock/
overlap Define the prefix dialling mode:
-
enblock —the callee number is sent as
a block;
-
overlap —the callee number is sent
with an overlap (by a single digit);
-
nochange —the callee number is sent
in the form it has been received from
the incoming channel.
direction <PFX_DIRECTION> local/
Emergency/
zone/
vedomst/
toll/
international Define the type of access to the trunk
group:
local —local;
emergency —emergency call;
zone —zone access;
vedomst —to a private network;
toll —to a long-distance network;
international —to an international
network.
duration <PFX_DURATION> 0-255 Set the number dialling duration
timer, in seconds
exit Return from this configuration
submenu to an upper level
getCID <ON_OFF> on/off Enable/disable Caller ID request for
prefix routing
history Show the history of entered
commands
mask edit Enter the prefix mask editing mode
mask show Show prefix masks
name <s_name> String, 31 characters
max. (allowed
characters: letters,
numbers, and "_")
Set prefix name/designation
needCID <ON_OFF> on/off Enable/disable CallerID mandatory
information request
numplan <PLAN_IDX> 0-15 Define the numbering schedule the
prefix belongs to
notdial ST <USE_ST> yes/no Disable/enable transmission of the end
dial marker (ST in SS or "
sending
complete " in PRI)
priority <PRIORITY> 0-100 Set prefix priority:
0—the highest priority;
100—the lowest priority.
quit Terminate this CLI session