ELTEX SMG-2, Operation Manual, Page: 147 / 198

SMG digital gateway 147
<ON_OFF> on/off
set interface telnet <NET_IFACE_IDX>
<ON_OFF> 0-39
on/off Enable telnet session through the
interface
set interface
use_mppe
<NET_IFACE_IDX>
<ON_OFF> 0-39
on/off Enable/disable encryption (for the
VPN interface only)
set interface
user_name
<NET_IFACE_IDX>
<USER> 0-39
Allowed characters: letters,
numbers,
"_", ".", "-";
63 characters max.
Set a user name (for the VPN
interface only)
set interface
user_pass
<NET_IFACE_IDX>
<PASS> 0-39
Allowed characters: letters,
numbers,
"_", ".", "-";
63 characters max.
Set a password (for the VPN
interface only)
set interface VID <NET_IFACE_IDX>
<VID> 0-39
1-4095 Define a VID for the interface
set interface web <NET_IFACE_IDX>
<ON_OFF> 0-39
on/off Enable web access through the
interface
set settings dns
primary
<IPADDR> IP address in the
AAA.BBB.CCC.DDD format
Specify IP address of the primary
DNS server
set settings dns
secondary
<IPADDR> IP address in the
AAA.BBB.CCC.DDD format
Specify IP address of the
redundant DNS server
set settings gateway <GATEWAY> network gateway address in
the
AAA.BBB.CCC.DDD
format
Specify IP address of the network
gateway
set settings
hostname
<HOSTNAME> Allowed characters: letters,
numbers,
"_", ".", "-";
63 characters max.
Specify a host name
set settings ssh <PORT> 1-65535 Set a TCP port for device access
via the SSH protocol, the default
value is 22
set settings telnet <PORT> 1-65535 Set a TCP port for device access
via the Telnet protocol, the
default value is 23
set settings
use_ip_list
<ON_OFF> on/off Enable/disable IP whitelist
set settings web <PORT> 1-65535 Set a TCP port for the web
configurator, the default value is
80
show interface
by_index
Show settings of the specified
network interface
show interface list Show the list of available network
interfaces
show settings Show network parameters
snmp Enter the SNMP configuration
mode
ssh restart Restart the SSH process
If an IP address or network mask has been changed or web configurator management has been
disabled for the network interface, confirm these settings using the
confirm command;
otherwise, the previous configuration will be restored in two minutes.