132
SMG digital gateway
Command
Parameter
Value
Action
?
Show the list of available commands
config
Return to the
Configuration
menu
exit
Return from this configuration submenu
to an upper level
history
Show the history of entered commands
N200
<N200>
0-255
Specify the number of connection
establishment attempts
quit
Terminate this CLI session
show
Show the LAPD configuration
t200
<T200>
0-255
Set T200 timer value, x100 ms
t203
<T203>
0-255
Set T203 timer value, x100 ms
4.3.8.2
Q.931 Signalling Configuration Mode for the Current E1 Stream
This mode is available only for Q.931 signalling (set by the
signaling
command). To enter this mode,
execute the
q931
command in the E1 stream configuration mode.
SMG4-[CONFIG]-E1[0]> q931
E1[0]. Signaling is Q931
SMG4-[CONFIG]- E1[0]-[Q931]>
Command
Parameter
Value
Action
?
Show the list of available commands
access category
<CAT_IDX>
0-31
Set access category for a stream
categoryAON
<CAT_AON>
0-15
Set a Caller ID category for the
incoming call
channel
<CHAN_NUM>
<on_off>
[0-31] or 'all'
on/off
Enable/disable the specified channel
chanorder
<CHAN_ORDER>
up_ring/down_ring/
up_start/down_start
Specify the channel engagement
order:
up_ring
—sequential forward;
down_ring
—sequential back;
up_start
—from the first and forward;
down_start
—from the first and back.
config
Return to the
Configuration
menu
exit
Return
from
this
configuration
submenu to an upper level
history
invokeID
<INVOKE_ID>
1024-65535
Set an initial call identifier for an
operation (used as a reference which
enables unique call identification for
operations)
name coding
<NAME_CODING>
transit
cp1251
siemens
avaya
translit
Name encoding:
transit
– transcoding is not performed
(name received in UTF-8, by defualt);
cp1251
–
Windows-1251 encoding;
siemens
–
Siemens PBX encoding;
avaya
–
AVAYA PBX encoding;
translit
–
roman transliteration of
Russian names.
name
transmission
<NAME_TRANS>
none
Q931-DISPLAY
QSIG-NA
Set the subscriber name transmission
method.