ELTEX LTP-4X, Operation Manual

Page: 172 / 199

172
LTP-8X(ont-template)("HSI-100-CaTV")# do commit
36.2 ONT Configuration Template Assignment
Step 1. Switch to the ONT view. You can use a range of ONT IDs for group operations if
necessary.
LTP-8X(config)# interface ont 0/0-10
LTP-8X(config)(if-ont-0/0-10)#
Step 2. Assign an ONT configuration template by using the template command.
LTP-8X(config)(if-ont-0/0-10)# template HSI-100-CaTV
Step 3. Define individual ONT parameters not specified in the template if necessary.
LTP-8X(config)(if-ont-0/0-10)# rf-port-state enabled
Step 4. Apply the changes made.
LTP-8X(config)(if-ont-0/0-10)# do commit
36.3 ONT Configuration Preview with Templates
You can view the ONT configuration using the same command: show interface ont <id>
configuration . You can distinguish the template parameters from the general ones by
[T] (Template) markers. In this example, Rf port state is the only general parameter.
LTP-8X(config)(if-ont-0/0-10)# do show interface ont 0/0 configuration
-----------------------------------
[ONT0/0] configuration
-----------------------------------
Description: ''
Enabled: true
Serial: ELTX5C00008C
Password: ‘0000000000'
[T] Fec up: false
[T] Easy mode: false
[T] Downstream broadcast: true
[T] Ber interval: none
[T] Ber update period: 60
[T] Rf port state: disabled
[T] Omci error tolerant: false
Service [0]:
[T] Profile cross connect: Service1 NT Profile Cross Connect 1
[T] Profile dba: dba-00 ONT Profile DBA 0
Custom cross connect: disabled
Service [1]:
[T] Profile cross connect: Service2 NT Profile Cross Connect 2
[T] Profile dba: dba-00 ONT Profile DBA 0
Custom cross connect: disabled