ELTEX LTP-4X Operation Manual Download Page 121 | Manualshive

Page: 121 / 199

background image

121

LTP-8X(config-cross-connect)("management")# type management

Step 10.

Check the changes made.

LTP-8X(config-cross-connect)("management")# do show profile cross-connect management
  Name: 'management'
  Description: 'ONT Profile Cross Connect 2'
  Model: ont
  Bridge group: 255
  Tag mode:     single-tagged
  Outer vid: 9
  Outer cos: unused
  Inner vid:   -
  U vid: untagged
  U cos: unused
  Mac table entry limit: unlimited
  Type: management
  IP host index: 0
  Priority queue: 0

Step 11.

Assign the created profiles in the ONT.

LTP-8X(config)# interface ont 0/0
LTP-8X(config)(if-ont-0/0)# service 0 profile dba AllServices
LTP-8X(config)(if-ont-0/0)# service 0 profile cross-connect Internet
LTP-8X(config)(if-ont-0/0)# service 1 profile dba AllServices
LTP-8X(config)(if-ont-0/0)# service 1 profile cross-connect UC_IPTV
LTP-8X(config)(if-ont-0/0)# service 2 profile dba AllServices
LTP-8X(config)(if-ont-0/0)# service 2 profile cross-connect management
LTP-8X(config)(if-ont-0/0)# profile ports Ports1
LTP-8X(config)(if-ont-0/0)# do show interface ont 0/0 configuration
-----------------------------------
[ONT0/0] configuration
-----------------------------------

  Description:      ''
  Enabled: true
  Serial: ELTX5C00008C
  Password: '0000000000'
  Fec up: false
  Easy mode: false
  Downstream broadcast: true
  Ber interval: none
  Ber update period: 60
  Rf port state: disabled
  Omci error tolerant: false
  Service [0]:
  Profile cross connect: Internet ONT Profile Cross Connect 1
  Profile dba: AllServices ONT Profile DBA 1
  Custom cross connect: disabled
  Service [1]:
  Profile cross connect: UC_IPTV ONT Profile Cross Connect 2
  Profile dba: AllServices ONT Profile DBA 1
  Custom cross connect: disabled
  Service [2]:
  Profile cross connect: management ONT Profile Cross Connect 3
  Profile dba: AllServices ONT Profile DBA 1
  Custom cross connect:    disabled
  Profile shaping: shaping-00 ONT Profile Shaping 0
  Profile ports: Ports1 ONT Profile Ports 1
  Profile management: unassigned
  Template: unassigned
  Pppoe sessions unlimited: false

Step 12.

"VLAN for Subscriber" requires a C-VLAN to be assigned for this ONT (subscriber). Assign

unique VLAN ID 200 for the Internet and IPTV services by using the

custom-cross-connect

command.

The management service operates in an S-VLAN, therefore, settings from the profile are used for the
service:

«
...
119
120
121
122
123
...
»

Summary of Contents for LTP-4X








































































































































































































Reviews:

No comments

Related manuals for LTP-4X

Brand: H3C Pages: 6

OfficeConnect 3CP4144

Brand: 3Com Pages: 4

OfficeConnect 3CP4144

Brand: 3Com Pages: 2

Brand: H3C Pages: 60

Brand: H3C Pages: 149

Brand: 3Com Pages: 27

Brand: Abocom Pages: 1

Brand: JCG Pages: 3

COMSPHERE 3800 Series

Brand: Paradyne Pages: 88

COMSPHERE 3800PLUS

Brand: Paradyne Pages: 5

Brand: Paradyne Pages: 2

NetIron MLXe Series

Brand: Brocade Communications Systems Pages: 305

Brand: Comelit Pages: 19

EdgeRouter PoE ERPoe-5

Brand: Ubiquiti Pages: 13

Brand: Ubiquiti Pages: 28

FireWire 800 ExpressCard 34

Brand: LaCie Pages: 24

Brand: Datum Pages: 49

Brand: Harman Pages: 24

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands