114
28.4.1
Model 1
Consider configuration of a data communication channel, which is based on Model 1 and
implements "VLAN for Subscriber" (except for the control service, which is implemented in S-VLAN).
Routed Mode
Configure the Internet (PPPoE), IPTV unicast, and management services via the TR-069 protocol. Set
the VLAN ID for the subscriber to 200, U-VLAN IDs to 10 and 11 for each service respectively. Traffic
between the OLT and ONT will be transmitted into VLAN 10 and 11. Multicast traffic will be transmitted
to VLAN 98, management will be performed via VLAN 9.
Fig. 28.3 – Routed Service Abstract Representation for Model 1
Step 1.
Assign a service model:
LTP-8X# configure terminal
LTP-8X(config)# gpon olt model 1
Step 2.
Create an Internet cross-connect profile for the configuration. By default, the profile uses a
routed service. Configure a U-VLAN with the help of the
u-vid
command (it equals 10 for the first service
in this case):
LTP-8X(config)# profile cross-connect Internet
LTP-8X(config-cross-connect)("Internet")# user vid 10
Step 3.
Check the changes made.
LTP-8X(config-cross-connect)("Internet")# do show profile cross-connect
Internet
Name:
’Internet’
Description:
’ONT Profile Cross Connect 1’
Model:
ont-rg
Bridge group:
-
Tag mode:
single-tagged
Outer vid:
1
Outer cos:
unused
Inner vid:
-
Summary of Contents for LTP-4X
