ELTEX LTP-4X, Operation Manual

Page: 16 / 199

16
Non-volatile memory LTP-8X 2x32 MB SPI Flash
LTP-4X/8Х rev. B 512 MB
LTP-4X/8Х rev. С 512 MB
Switch
Ethernet switch Marvell Packet Processor
Switch bandwidth 128 Gbps
MAC table 16K entries
VLAN support Up to 4K according to 802.1Q
Quality of Service (QoS) 8 prioritized output queues for each port
Control
Local control CLI—command line interface
Remote control CLI (SSH2, Telnet), SNMP
Monitoring СLI, SNMP
Access restriction by password, IP address, MAC address, privilege level
General Parameters
Power supply AC: 150–250 V, 50 Hz
DC: -36..-72 V
Power supply options for LTP-4X/8X rev. C:
–
one AC/DC power supply;
–
two AC/DC hot swappable power supplies.
Power consumption LTP-8X (HW version 1vX) not more than 20 W
LTP-8X (HW version 2vX) not more than 55 W
LTP-4X not more than 40 W
Operating temperature range from +5 to +40°С
Relative humidity up to 80%
Dimensions 19" form-factor, 1U size
Dimensions with an installed power module:
LTP-8X 430x44x258 mm
LTP-4X/8Х rev. B 430x44x258 mm
LTP-4X/8Х rev. С 430х44х318 mm
Net weight Complete set
LTP-8X
not more than 3.5 kg
LTP-4X/8Х rev. B not more than 3.5 kg
LTP-4X/8Х rev. С not more than 5 kg
Modules
Power module
0.5 kg