GW-GNET+
6
gas-lab
Q1
Page 97
6 GAS-WORKS / GW-GNET+
gas-net
devices are parameterised with a PC or laptop computer and the
software system GAS-WORKS.
All
gas-net
devices are parameterised with the same GAS-WORKS module,
called GW-GNET+.
10
The next two sections generally explain how to compile or edit a complete
gas-
net
parameterisation using GW-GNET+ and how to export it to the device. It is
rather easy to learn how to work with the parameterisation program. As soon as
you have mastered the techniques you only need to know the meaning and
effect of each adjustable parameter, no matter which
gas-net
device type is
actually concerned. This is why we have enclosed a complete parameter list
with additional information in the annex to this documentation.
For a detailed description of the parameterisation program and other editing
methods read the online help of GW-GNET+.
11
Important note:
Protected parameters can only be changed by a computer and
not on the panel with opend calibration switch.
The following description refers specifically to a parameterization, witch modified
parameters protected with calibration switch.
10
Please refer to the GAS-WORKS CD-ROM, which is part of the delivery scope of each
gas-net
device, for further information on the GAS-WORKS program system with all the
possibilities it provides. All GAS-WORKS components can be installed from this CD. The
CD also contains the operating instructions for all GAS-WORKS modules, in particular for
GW-GNET+.
11
It is possible to change the device parameterisation or single parameters via an
established data connection between the computer and the device. This is advantageous
with respect to different situations: For instance, you may exchange operational parts of
the parameterisation in the GW-GNET+ Edit parameterisation mode, even if the
calibration switch is closed. In the Change parameter mode, parameters characterised as
changeable online can be edited without restarting the device.