Disassembly
8
© Gardner Denver Deutschland GmbH
31
/
60
09.2013 · 610.44495.40.310
Disassembling the rotor
▪
Remove screws (003) with washer (004).
▪
Remove the intermediate flange (026).
▪
Remove the nuts (409) from the motor housing (001).
▪
For rotors with weights over
20 kg
[44 lbs]: screw the threaded rod along with
ring nut (K) into the rotor hole (005).
▪
Attach the crane hook to the ring nut.
▪
NOTICE! Do not damage the windings (e.g.: by twisting or pushing).
▪
Pull the rotor (005) carefully out of the motor housing (001).
▪
Place the rotor (005) on the rotor support (G) and remove the crane hook.
▪
NOTICE! Screw a screw of the correct size into the threaded hole in the
rotor (005) to protect it from damage.
▪
Pull the roller bearing (008) off using the bearing puller (B).
8.7
Prematic AG, Märwilerstrasse 43, 9556 Affeltrangen www.prematic.ch
Tel. 071 918 60 60, Mail: [email protected]