2
Safety and responsibility
610.44495.40.310 · 09.2013
6
/
60
© Gardner Denver Deutschland GmbH
Safety and responsibility
The manufacturer is not liable for damage caused by the failure to observe these
instructions and the related documents [
➙
5].
Explanation of warning signs
Warning sign
Explanation
DANGER
Danger that failure to observe the measures could lead to
death or serious physical injuries.
WARNING
Danger that failure to observe the measures could lead to
death or serious physical injuries.
CAUTION
Danger that failure to observe the measures could lead to
minor physical injuries.
NOTICE
Danger that failure to observe the measures could lead to
material damage.
Working in a safety-conscious manner
Work on running or energised vacuum pumps/compressors can lead to seri-
ous injuries due to body parts being drawn in or crushed or death due to
electric shock.
Work on the G-BH2 at a standstill only and in a de-energized condition.
1. Disconnect.
2. Secure it to prevent it from being switched back on.
3. Make
sure
that
it is de-energised.
4. Earth it and short-circuit it.
5. Cover or block off adjacent parts which are still supplied with voltage.
After decommissioning, contact with hot surfaces can lead to burns.
Allow the G-BH2 to cool after shutting it down.
Improper repair can lead to severe injuries due to damaged or incorrectly-
installed parts.
1. Follow the procedures for decommissioning described in the operating in-
structions.
2. Do not use striking tools if not specifically mentioned.
3. Do not damage parts to be reused while using tools.
4. Replace damaged parts.
5. Observe the assembly and start-up procedures described in the operating in-
structions before starting the device.
Changes, additions and conversions may lead to unforeseeable risks and
thus to serious injuries or death.
Changes, additions and conversions to the G-BH2 that are not described any-
where in the documentation must be authorised by the manufacturer.
Only use original parts or parts/auxiliary materials (grease, sealant) approved by
the manufacturer. Using other parts and auxiliary materials can lead to unforesee-
able hazards and may exempt the manufacturer from liability for the resulting con-
sequences.
Keep all notices attached to the G-BH2 in a clearly legible condition:
▪
Labelling of connections
▪
rotation arrows
▪
Rating plate
▪
Warning signs
2
2.1
2.2
Work at a standstill and
de-energised
Hot surfaces
Improper repair
Changes, additions and
conversions
Prematic AG, Märwilerstrasse 43, 9556 Affeltrangen www.prematic.ch
Tel. 071 918 60 60, Mail: [email protected]