8
Disassembly
610.44495.40.310 · 09.2013
24
/
60
© Gardner Denver Deutschland GmbH
Disassembly
This section describes the disassembly of a standard model.
For models with the following options, a reference will be made at the appropriate
place in section Assembly options [
➙
53].
A
Integrated frequency inverter 2FC.…-1
C
Discharge side and/or suction side without
silencer with flange
B
Auxiliary ventilator
D
Discharge side and/or suction side, cover side
When the G-BH2 is equipped with integrated frequency inverter 2FC4..2-1ST
(A), then continue disassembly with Disassembling the integrated frequency
inverter 2FC4..2-1ST/PB/CB/SC [
➙
46].
When the G-BH2 is equipped with integrated frequency inverter 2FC4..3-1ST
(A), then continue disassembly with Disassembling the integrated frequency
inverter 3FC4..2-1ST/PB/CB/SC [
➙
47].
If the G-BH2 is equipped with integrated frequency inverter 2FC4...-1NE (A),
then continue disassembly with Disassembling the integrated frequency
inverter 2FC4...-1NE [
➙
48].
If the G-BH2 is provided with a flange on the discharge side and/or suction
side without silencer (C) , then continue disassembling as per Disassembly
of flange without silencer [
➙
51].
If the G-BH2 is equipped with an (D) on the discharge side and/or suction
side cover, then continue disassembly with Disassembling the cover side
silencer and blind flange [
➙
50].
8
Prematic AG, Märwilerstrasse 43, 9556 Affeltrangen www.prematic.ch
Tel. 071 918 60 60, Mail: [email protected]