2
Safety and responsibility
610.44495.40.310 · 09.2013
8
/
60
© Gardner Denver Deutschland GmbH
Personal protective equipment
WARNING
Cutting of body parts due to sharp edges on the inside and outside of the G-
BH2!
Crushing due to small clearance gaps in the G-BH2 or falling parts!
Eye injuries due to breaking parts in disassembly!
1. Wear protective goggles and safety footwear for all repair work.
2. Use protective gloves when disassembling or assembling sharp-edged parts
(e.g. impeller, housing).
3. In addition, wear a safety helmet for transportation and overhead work.
Requirements of the operator
The operator of the repair operation ensures that:
▪
All work on the G-BH2 is carried out by:
– personnel that have the necessary Personnel qualifications and training [
➙
7]
– personnel that have been sufficiently informed of these instructions and all
related documents [
➙
5]
▪
Assignment, responsibility and supervision of personnel is regulated.
▪
The content of these and locally applicable instructions are always available to
personnel.
▪
Personnel are informed of the conveyed media and the emergency safety
measures, so as to prevent injuries.
▪
All local and plant-specific safety measures are adhered to, such as:
– Prevention of accidents
– safety and operating regulations
– Utility company regulations
– Standards and laws
▪
Dangers due to electrical energy are not possible.
2.4.2
2.5
Prematic AG, Märwilerstrasse 43, 9556 Affeltrangen www.prematic.ch
Tel. 071 918 60 60, Mail: [email protected]