73/112
WL31/WL31TG
MAINTENANCE
Caution: if the system is active, no access to the maintenance menu
8.54 MAINTENANCE [8]
Menu > Maintenance
Authorization level:
TECHNICIAN
Purpose:
The MAINTENANCE menu, which can only be accessed with the technician code, enables the management of
relevant system infrastructural characteristics: radio communication parameters (with check of the different
connection qualities), periphery device acquisition/deleting/replacement, setting of the radio communication
security level, backup recording of all the programming undertaken.
Sub menu
Fast code
Maintenance- Radio Parameters
80
Maintenance- Acquire dev.
81
Maintenance- Eliminate dev.
82
Maintenance- Replace dev.
83
Maintenance- Connection test
84
Maintenance- Stop Menu
85
Maintenance- Advanced
86
8.55 MAINTENANCE - RADIO PARAMETERS [80]
Menu >Maintenance > Maintenance- Radio Parameters
Authorization level:
TECHNICIAN
Sub menu
Fast code
Radio Parameters - Search channel
800
Radio Parameters - Choose channel
801
Radio Parameters - System code mod
802
8.56 RADIO PARAMETERS - SEARCH CHANNEL [800]
Menu >Maintenance > Maintenance - Radio Parameters > Radio Parameters - Search channel
Authorization level:
TECHNICIAN
Purpose:
This carries out an analysis of the 8 available channels and identifies the channel which offers the best
communication quality.
How to do it:
1. Press the
OK
key. The display
shows the “Measurement underway” message and a bar which shows the
operation advancement.
2. Where
‘*’
is also appearing beside the channel, it means that there are not any completely free channels;
however, the selected channel is the one which offers bets communication.
3. Press
ESC
ESC
to exit the function.
Caution: Searching for a channel can go on up to 16 minutes maximum; during this time, control panel
does NOT perform any other management operations; further, during this time, control panel cannot be
interrupted. During this time, do NOT disconnect power supply in order to avoid loss of data.
REMARK: this functions can be
activated only of NO DEVICE IS
ACQUIRED
