Elite iGATE G500 Series Operator'S Handbook Manual Download

Page: 89 / 157

MOVE POINT

Push the CTRL & SHIFT keys on the key board and the cursor

changes to “move point.” Click on any route point you want to move

and drag it with the mouse to another location. Release the mouse

button and changes take effect.

ROUTE INFORMATION

Click and hold on individual route points to get route and leg infor-

mation. Point coordinates, as well as track and distance information

are displayed in an accompanying window as long as the mouse but-

ton is held down.

SHORTCUTS

To display the Shortcuts Information window, click on the “?“ but-

ton. The Short cuts window will open and display all shortcuts (key

combinations that enable certain functions).

Summary of Contents for iGATE G500 Series





























































































































































Search results

Summary of Contents for iGATE G500 Series

Reviews:

Related manuals for iGATE G500 Series

Brands by name

Popular brands

Elite iGATE G500 Series, Operator'S Handbook Manual

Search results

Summary of Contents for iGATE G500 Series

Reviews:

Related manuals for iGATE G500 Series

Brands by name

Popular brands