Elite iGATE G500 Series Operator'S Handbook Manual Download Page 125

Page: 125 / 157

125

CONFIGURATION PAGE

“HELP Tips” are available anytime by pressing ALT-H. Move the help cursor (?)

over any on-screen item that you would like more information about. When the

help cursor reveals its document icon, help is available for that item. Simply click

on the item to display related help tips.

Use this page to configure flight controls, hardware, instrumenta-

tion, and sound. Some of these have already been covered during

the Startup procedures in Chapter One.

TATE FILES

When the “Ask for

State File

at Program Start” button is ON, ELITE

will display a dialog box (on every startup) allowing you to choose

any training “State File” previously saved. You will be positioned

with the same aircraft in that specific state (including Nav data and

Meteo State selected!).

Summary of Contents for iGATE G500 Series





























































































































































Search results

Summary of Contents for iGATE G500 Series

Reviews:

Brands by name

Popular brands

Elite iGATE G500 Series, Operator'S Handbook Manual

Search results

Summary of Contents for iGATE G500 Series

Reviews:

Brands by name

Popular brands