Elite iGATE G500 Series, Operator'S Handbook Manual

Page: 4 / 157

4
PREFACE
WARNING
Any unauthorized changes to the iGATE trainer regarding
removal, replacement or repositioning of original flight con -
trol components, avionics or switches, not in accordance
with manufacturer specifications, will void the FAA approval
for logging flight time credit. Only ELITE ATD software may
be used with this training device for certification purposes.
The instructions and limitations detailed in the FAA letter of
approval pertaining to this model of advanced aviation train-
ing device must be adhered to and kept in close proximity to
the trainer. The controlling authority for the use this training
device in a Part 61 or 141 or 142 course of instruction is
the Federal Aviation Administration, General Aviation and
Commercial Division, AFS-810, 800 Independence Avenue,
Washington D.C. 20591.
REVISIONS
For operational purposes, this handbook should be kept in
current status with revisions provided with software upgrades
or hardware modifications. Revisions to this handbook will
be distributed whenever necessary as complete replace-
ments or additions and shall be inserted into the handbook
as below:
Revision pages will replace only pages with the same page
number. Insert all additional pages in proper numerical order
within each section.
Page numbers followed by a small letter shall be inserted in
direct sequence with the same common numbered page.