Elite iGATE G500 Series Operator'S Handbook Manual Download

Page: 97 / 157

WIND

There are three wind layers in the ELITE weather environment. Each

wind layer can have its own characteristics and are all configured in

the same way on the METEO page utilizing identical control panels.

Wind layers can NOT be less than 200 feet thick. The thickness of

each layer is defined by the values entered on the panels. Note that

the top of the bottom wind layer is also the base of the mid wind

layer. The top of the mid wind layer is also the base of the top wind

layer.

TRANSITION ZONES

Transition Zones are available for each of the three Cloud Layers

and can only be selected when overcast (OVC) coverage is in use. A

Transition Zone creates a gradual visual transition to and from the

cloud conditions existing above or below the layer where it is used

and is noticeable only when climbing or descending into, or out of,

the overcast layer it is associated with.

Summary of Contents for iGATE G500 Series





























































































































































Search results

Summary of Contents for iGATE G500 Series

Reviews:

Related manuals for iGATE G500 Series

Brands by name

Popular brands

Elite iGATE G500 Series, Operator'S Handbook Manual

Search results

Summary of Contents for iGATE G500 Series

Reviews:

Related manuals for iGATE G500 Series

Brands by name

Popular brands