Elite iGATE G500 Series Page 134 Operator'S Handbook Manual Download

Page: 134 / 157

134

When 200 modifications have been made the following message

appears:

FACILITY INFORMATION

Click and hold the mouse on any facility to display detailed informa-

tion about that facility. For run way information, click on the runway

threshold.

When facilities are in the

same location or covered

by other ones, click on

the same spot once more

and information about

the next facility will ap-

pear.

In the example above, several facilities nearly occupy the same lo-

cation or are co-located. Information on these facilities is layered.

Clicking the same spot repeatedly cycles through these layers to re-

veal information about each specific facility

Summary of Contents for iGATE G500 Series





























































































































































Search results

Summary of Contents for iGATE G500 Series

Reviews:

Related manuals for iGATE G500 Series

Brands by name

Popular brands

Elite iGATE G500 Series, Operator'S Handbook Manual

Search results

Summary of Contents for iGATE G500 Series

Reviews:

Related manuals for iGATE G500 Series

Brands by name

Popular brands