Elite iGATE G500 Series Operator'S Handbook Manual Download Page 67

Page: 67 / 157

NAV DATA DISCLAIMER

We do our best to ensure the accuracy of the NAV data in the soft-

ware. Unfortunately, inaccuracies originating from the data source

are beyond our control and may be encountered at some point over

time in the normal course of using the product. If you do encounter

data that you feel is in error please make a note and let us know. The

more information you can gather about the speciﬁcs of your expe-

rience, the better. Make note of data that is suspected missing, inac-

curate, erroneous, or otherwise anomalous and notify us with the

details.

There can be several sources of navigation data with the trainer:

the data shown on the map screen (provided by ELITE); the GPS

nav data provided by Jepp/Garmin and the visual data provided by

ELITE, Lockheed Martin or other 3rd party visual provider. All data

LOADING

NAVIGATION DATA

Click and hold on the arrow symbol

part of the label. Move the cur-

sor to Load Database and release

the mouse button. When data has

sucessfully loaded, the gray bound-

ary box will turn to red.

Summary of Contents for iGATE G500 Series





























































































































































Search results

Summary of Contents for iGATE G500 Series

Reviews:

Brands by name

Popular brands

Elite iGATE G500 Series, Operator'S Handbook Manual

Search results

Summary of Contents for iGATE G500 Series

Reviews:

Brands by name

Popular brands