Elite iGATE G500 Series Operator'S Handbook Manual Download

Page: 40 / 157

USB BUTTON

Press “USB” button to see ELITE USB hardware connected

ADJUSTING CONTROL SENSI-

TIVITY:

NON CL FLIGHT CONTROL ONLY!

Increase or decrease numbers in the P, R,

Y boxes to adjust control sensitivity. Start

with low to mid-range. Yaw usually re-

quires more dampening than pitch or roll.

Numbers between 0.00 (no dampening) and

0.20 (maximum dampening) change the sen-

sitivity of flight control devices.

SECOND MONI-

TOR

: Pressing the 2ND

SCREEN button assigns

the

program menu to the 2nd

monitor. This allows someone sitting at the instructor’s station easier

access to the program menu and features.

Summary of Contents for iGATE G500 Series





























































































































































Search results

Summary of Contents for iGATE G500 Series

Reviews:

Related manuals for iGATE G500 Series

Brands by name

Popular brands

Elite iGATE G500 Series, Operator'S Handbook Manual

Search results

Summary of Contents for iGATE G500 Series

Reviews:

Related manuals for iGATE G500 Series

Brands by name

Popular brands