Elite iGATE G500 Series Operator'S Handbook Manual Download Page 36

Page: 36 / 157

NAVIGATION DATABASES

When “Ask for Navigation Databases at program start” button is

ON, ELITE will ask (on every startup) to select a NAV database

area to fly in.

“Easy open of Navigation databases” allows you to

choose a NAV area by viewing thumbnail maps of all available

individual navigation areas installed.

NOTE:

To have ELITE automatically start up (default) to the same

aircraft and NAV area each time, ﬁrst make sure you are currently

using the NAV area you would like for subsequent startups, then

turn OFF “Ask for Navigation data bases at program start” buttons.

Box 2: HARDWARE CONFIGURATION.

HANGING SYSTEM SETTINGS:

Do NOT USE Changing Sys-

tem Settings unless instructed to do so by ELITE Technical Support

personnel.

Adjustments to System Settings can render the iGATE inoperative!

Summary of Contents for iGATE G500 Series





























































































































































Search results

Summary of Contents for iGATE G500 Series

Reviews:

Brands by name

Popular brands

Elite iGATE G500 Series, Operator'S Handbook Manual

Search results

Summary of Contents for iGATE G500 Series

Reviews:

Brands by name

Popular brands