Elite iGATE G500 Series Operator'S Handbook Manual Download Page 25

Page: 25 / 157

NOTE: USB WIBU KEY

The WIBU Key is a dongle that contains the serial number to the

simulator’s software. If this key is missing, malfunctioned or the

WIBU key driver is missing or corrupted, the simulation will stop

in 3 minutes! If the simulator freezes in 3 minutes, the WIBU key

is missing, the key has malfunctioned or the USB hub has stopped

working. The WIBU key is typically located inside the iGATE con-

sole plugged into the commercial USB hub. It may be plugged into

the HOST computer. If the key is recognized and operating properly.

it should be identified in the Windows Device Manager. Contact

ELITE for additional support if needed.

WIBU Key (Black or Green Color)

The ELITE or P3D visual scenery can be shown on any device

that will receive a computer signal (i.e. TVs, monitors, projec-

tors). The HOST and VISUAL computers are custom built

and configured for the iGATE. Multiple displays may be used

to achieve up to 220 degree fields of view. Do not modify the

display(s) or replace components without consulting an ELITE

technician. Performance, visual correctness and approval author-

ity may be jeopardized.

Summary of Contents for iGATE G500 Series





























































































































































Search results

Summary of Contents for iGATE G500 Series

Reviews:

Brands by name

Popular brands

Elite iGATE G500 Series, Operator'S Handbook Manual

Search results

Summary of Contents for iGATE G500 Series

Reviews:

Brands by name

Popular brands