ELAD FDM-DUOr
User Manual - Rev. 1.1 - 04/2016
© 2016 ELAD S.r.l. All rights reserved. No part of this document may be reproduced, published, used, disclosed or disseminated in any form or
by any means, electronic, photocopying or otherwise, without prior written permission of ELAD S.r.l.
15
4
Quick Start
These instructions are intended only for a quick guide, detailed instructions are given later in this
manual.
4.1
First of all
To avoid having a forest of buttons and knobs as front panel, each control has different operating
modes.
The buttons can be “short pressed” or “long pressed” to activate different functions. The different
functions associated to each pressure are written in different colors just above the corresponding
button. Each top white label is associated to the “short pressure” on the button, while the lower blue
label is associated to the “long pressure”.
The knobs can be pressed as well to control a different parameter.
swaps A and B VFOs if “short pressed”, and swaps VFO and Memory mode if “long pressed”.
The A/B label refers to the A/B VFO swap obtained with a “short pressure”.
The M label refers to the VFO/Memory mode swap obtained with a “long pressure”.
Example
A button is “long pressed” when it is kept pressed for more than 1 sec.
This value can be changed using menu 71 ( Hold Time ) as explained in section
5.5 - Settings Menu
List
.
Valid values can vary from 500 ms to 2500 ms.
Long Pressure
The E1 knob usually controls the audio volume, but if pressed once it controls the squelch value.
Example
The tuning knob can be pressed to change the tuning step or to enter the “Digit by digit tuning
mode”.
The tuning knob operations are detailed in section
5.1.1 - Tuning
.
Tuning
