ELAD FDM-DUOr
User Manual - Rev. 1.1 - 04/2016
© 2016 ELAD S.r.l. All rights reserved. No part of this document may be reproduced, published, used, disclosed or disseminated in any form or
by any means, electronic, photocopying or otherwise, without prior written permission of ELAD S.r.l.
11
2.3
Preselectors Description
2.3.1
Preselectors Slots
The FDM-DUOr has ten slots for preselector filters. To change the preselectors configuration remove the
top cover, identify the appropriate slot and insert or remove the preselector board. The picture below
shows their position and numbering. Use the FDM-DUOr manager in the FDM-SW2 software to send the
preselectors configuration to the FDM-DUOr.
See below the FDM-DUOr front end block diagram.
