ELAD FDM-DUOr
User Manual - Rev. 1.1 - 04/2016
© 2016 ELAD S.r.l. All rights reserved. No part of this document may be reproduced, published, used, disclosed or disseminated in any form or
by any means, electronic, photocopying or otherwise, without prior written permission of ELAD S.r.l.
21
5.1.6
“QuickMem” Mode
Keep pressed the key to enter the “QuickMem” mode.
The memory channels 180 to 199 are reserved for the “QuickMem” selection. Keep pressed the key
until the desired frequency appears on the LCD display, then release the key and the current VFO is set
to the frequency and mode saved in the memory channel.
You can use the “FDM-DUOr Manager” feature in the ELAD FDM-SW2 software to customize the
memory channels.
5.1.7
VFO-A = VFO-B
With long pressure on key you get VFO-A = VFO-B
5.1.8
Change Operating Mode
With a short pressure on the button, you can change the receiver mode between the available
modes:
5.1.9
“QuickStep”
With a short pressure on the key, the “QuickStep” function is activated. This function quickly sets
the frequency step preset selected in the “QuickStep” setting menu, press again the key to set the
previous frequency step.
USB
CW
FM
AM
LSB
