ELAD FDM-DUOr
User Manual - Rev. 1.1 - 04/2016
© 2016 ELAD S.r.l. All rights reserved. No part of this document may be reproduced, published, used, disclosed or disseminated in any form or
by any means, electronic, photocopying or otherwise, without prior written permission of ELAD S.r.l.
16
4.2
Reset
When first approaching a largely programmable device like FDM-DUOr it is nearly unavoidable to mess
some parameters with useless values. This is not a problem and should not prevent users from trying
the different settings, since a “reset” command is available to bring back the device to the factory
settings.
4.3
A first trip
A radio like FDM-DUOr has many possible application scenarios, both used as a stand-alone device, and
paired with its mate software.
In this section the simplest and most common uses will be shown, to allow a first familiarization with
FDM-DUOr.
The first use for FDM-DUOr is, clearly, reception. To do that, just connect the device to a 12V power
supply (or to a battery) and turn it on by using the back switch.
After some seconds the device is in reception mode with VFO A enabled.
The reset procedure is quite simple:
•
short press the MENU button
•
turn the F2 knob until reading 81 DEFAULT on the display
•
short press the E2 knob to show “N” on the right of DEFAULT
•
turn the E2 knob to change “N” to “Y”
•
short press the E2 knob
•
wait for the radio reset and restart
Reset
