ELAD FDM-DUOr
User Manual - Rev. 1.1 - 04/2016
© 2016 ELAD S.r.l. All rights reserved. No part of this document may be reproduced, published, used, disclosed or disseminated in any form or
by any means, electronic, photocopying or otherwise, without prior written permission of ELAD S.r.l.
13
3
LCD Display
1.
LP: turns on when the low pass filter is active.
ATT: turns on when attenuation is active.
2.
METER: displays the signal strength in S-units.
3.
Units of measurements of the values displayed. The “S” letter of SWR is also used to indicate
that the “QuickStep” function is active.
4.
PK: blinks if the ADC of reception is “overloaded”.
5.
Secondary indication: displays the signal strength in dBm.
6.
Measurement unit for the secondary indication.
7.
LOC: turns on when the Main Knob is locked.
REM: turns on when the remote mode is active, turns off when the stand-alone mode is active.
8.
CAT: turns on when a CAT command is received.
SERV: turns on when the service mode is enabled.
9.
Displays the selected operating mode.
10.
Turns on when the external frequency reference is present.
11.
E2 selected function :
: filter bandwidth setting,
PITCH : CW pitch frequency setting,
RIT
:
Receiver Incremental Tuning setting.
12.
Alphanumeric characters to displaying messages and numeric values.
