ELAD FDM-DUOr
User Manual - Rev. 1.1 - 04/2016
© 2016 ELAD S.r.l. All rights reserved. No part of this document may be reproduced, published, used, disclosed or disseminated in any form or
by any means, electronic, photocopying or otherwise, without prior written permission of ELAD S.r.l.
75
8.4
User interface (UI) firmware update
Download the latest version of the user interface firmware.
Before starting the firmware update, it is recommended to disable all antivirus programs in order to
avoid any inconvenience.
In order to update the user interface (UI) firmware, you need to install the Flash Magic software. This
program is available here:
http://www.flashmagictool.com/
Turn on the FDM-DUOr and connect the CAT USB port to a USB 2.0 port of your computer. Follow the
steps below to enable the user interface reprogramming mode :
Press the key, turn the E2 knob to go to the menu 80 (SERVICE), press E2 to enter in the
menu,
turn E2 to display “ON” and press E2 to confirm,
turn E2 to go to the menu 82 (UI Update), press E2 to enter in the menu,
turn E2 to display “YES” and press E2 to confirm.
Then you need to identify the CAT USB port number. Open the windows “Device Manager” and expand
the “Ports (COM &LPT)” node. The CAT USB port is listed as “USB Serial Port”.
In the picture above the CAT USB port number is COM19.
