ELAD FDM-DUOr
User Manual - Rev. 1.1 - 04/2016
© 2016 ELAD S.r.l. All rights reserved. No part of this document may be reproduced, published, used, disclosed or disseminated in any form or
by any means, electronic, photocopying or otherwise, without prior written permission of ELAD S.r.l.
63
Let the hardware installation automatically completes and, at the procedure ending, click on “Close”;
then disconnect and connect FDM-DUOr device on the same USB socket.
To verify that a correct update is done, enter “Device Manager” in Control Panel; under “ELAD samplers”
label select ELAD FDM-DUO driver (see sub-chapter
Driver installation verify in Windows 8 and Windows
7
): right click on it and choose “Properties”: select “Driver
”
label to visualize the last driver version (an
example is depicted in figure below).
