ELAD FDM-DUOr
User Manual - Rev. 1.1 - 04/2016
© 2016 ELAD S.r.l. All rights reserved. No part of this document may be reproduced, published, used, disclosed or disseminated in any form or
by any means, electronic, photocopying or otherwise, without prior written permission of ELAD S.r.l.
60
7.2.1.2
Driver installation verify
To verify FDM-DUO driver current version, connect the device to USB socket (where the device driver is
already installed) and power on the device. Then open
Control Panel
from
Start
menu. Click on
“System” and select “Device Manager”.
Expanding “ELAD Samplers” node, right click on “ELAD FDM-DUO” and select “Properties”.
When dialog box opens, select “Driver” label: you must read provider name, current driver release date
and current driver version. The figure shows an old FDM- DUO driver version.
