ELAD FDM-DUOr
User Manual - Rev. 1.1 - 04/2016
© 2016 ELAD S.r.l. All rights reserved. No part of this document may be reproduced, published, used, disclosed or disseminated in any form or
by any means, electronic, photocopying or otherwise, without prior written permission of ELAD S.r.l.
22
5.2
MEM Mode
To activate the memory mode, apply a long pressure on . In MEM mode it is possible to receive,
transmit and change the E1/E2 settings in the same way of the VFO mode.
5.2.1
Select and edit a memory
Use the main knob to select a memory. Apply a long pressure on the main encoder to enter the edit
memory menu. In this menu it is possible to modify the selected memory frequency in digit by digit
mode.
5.2.2
Delete a memory
Apply a long pressure to the key to enter the delete menu
Use the E2 knob to set yes or no and make a short pressure on E2 to confirm.
5.2.3
Set memory to VFO
Use the button to select the VFO-A/B. Use the key to set in the selected VFO the selected
memory frequency and mode. When this function is used, the FDM-DUOr automatically switches to the
VFO mode.
