Action
Step
Insert the pipette into the probe sheath assembly through the threaded hole
in the probe sheath assembly end plug.
3
Inject the water into the probe sheath assembly.
Note:
The inserted water provides the steam inside the probe sheath assembly
during autoclaving.
4
Remove the pipette.
5
Verify that the O-rings are present on the probe.
6
Insert the probe into the probe sheath assembly through the threaded hole
in the probe sheath assembly end plug.
7
184
Xcellerex XDUO 2500 Mixer Operating Instructions 29146667 AH
6 Preparation
6.4 Prepare and install the probes
6.4.3 Autoclave probe sheath assembly
