EFKA FP220A5911
24
7.5 Keys for Background Information (HIT) with V820
(key assignment see figure on the last page)
For fast operator information, the values of functions switched on by means of the 1, 2, 3, 4 and 9 keys are displayed on the
control panel for approx. 3 seconds. During this time, the respective values can be varied directly by pressing the
+
or
-
key.
7.5.1 Example of HIT
Increase stitch-count seam section from 20 stitches to 25 stitches.
Stitch-count function (2 key) is off.
Display after power on
"
↓↓↓↓
Press the
2
key briefly ! Lefthand arrow
and stitch-count function are on
"
Press the
+
key !
"
Increase the number of stitches from 20 to 25 !
Display after approx. 3 seconds
"
Stitch-count function (2 key ) is already on.
Display after power on
"
↓↓↓↓
Press the
2
key for at least 1 second!
Lefthand arrow goes off momentarily;
"
stitch-count function is on
Press the
+
key !
"
Increase the number of stitches from 20 to 25 !
Display after approx. 3 seconds
"
These values are saved when you start sewing. They remain in effect even after turning the machine off!
Using parameter 401 is another possibility for immediate storage without having to start sewing.
Function key F
Various parameters, even higher-level parameters, can be switched on or off by pressing the function key (9 key).
The following functions may be assigned to the function key:
1.
Softstart ON/OFF
2.
Ornamental backtack ON/OFF
3.
Sewing start blocked with light barrier uncovered ON/OFF
4.
Unlocking the chain ON/OFF
5.
Signals A1 and/or A2 On/Off with slide-in strips 1...4 (lefthand arrow = A1, righthand arrow = A2)
The key assignment can be changed as follows:
Display after power on
"
Press the
P
key!
"
Note
The following functions are possible only with the V820 control panel!
4000 FP220A
2
Stc 020
+
Stc 025
4000 FP220A
2
Stc 020
+
Stc 025
4000 FP220A
4000 FP220A
P
4000 FP220A
