EFKA FP220A5911
43
Connection of a sensor e. g. light barrier or proximity switch to socket B18/7. The following settings are possible using
parameter 270:
Parameter 270 = 1
- Setting the sensor to position 2.
- Position 1 is set according to the angular degree setting by means of parameter 271.
- Start measuring from trailing edge position 2.
- 0V at input B18/7 (inside of the window)
- +5V at input B18/7 (outside of the window)
Parameter 270 = 2
- Setting the sensor to position 2.
- Position 1 is set according to the angular degree setting by means of parameter 271.
- Start measuring from leading edge position 2.
- Input and output level as with setting “1“
Parameter 270 = 3
- Setting the sensor to position 1.
- Position 2 is set according to the angular degree setting by means of parameter 271.
- Start measuring from trailing edge position 1.
- Input and output level as with setting “1“
Parameter 270 = 4
- Setting the sensor to position 1.
- Position 2 is set according to the angular degree setting by means of parameter 271.
- Start measuring from leading edge position 1.
- Input and output level as with setting “1“
OUT (position window) = npn transistor (emitter to 0V) is conductive.
Width of position window cannot be adjusted.
= 0V
O U T
O U T
O U T
O U T
ST2
IN
P O S 1
S T2 / 2 0
P O S 2
P O S 2
S T2 / 2 0
P O S 1
S T2 / 2 1
S T2 / 2 1
P O S 1
S T2 / 2 0
P O S 1
S T2 / 2 1
P O S 2
S T2 / 2 0
P O S
B 1 8 / 7
P O S 2
S T2 / 2 1
S EN
= high
0 2 5 6 / S EN - 2
P a 2 7 1
P a 2 7 1
P a 2 7 1
P a 2 7 1
3 6 0 °
27
0 =
1
27
0 =
3
27
0 =
4
27
0 =
2
+ 5 V
0 V
