EFKA FP220A5911
60
Graduation of the examples below is as follows:
Speed
3500
X
X
X
X
X
upper speed break point
3200
X
3110
X
3020
X
2930
X
2840 X
2740 ----------------------------------------------------------- X
2650
X
2560
X
2470
X
2380
X
2280
X
2190
X
2100
X
2000
lower speed break point
X
X
X
01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21
Levels
Display example of parameter 188 on the V820 control panel:
"
Signification:
XX
"
Display of the level up to which the maximum speed is effective
(upper break point).
YY
"
Display of the level from which the maximum speed is effective
(lower break point).
AB
"
Diplay of the level set on the potentiometer.
ZZZZ
"
Speed resulting from the set high lift level.
EEEE
"
Outside of the speed range.
11.14.2 Setting the Speed Limitation Depending on High Lift with the V820 Control
Panel
!
Determine maximum speed (n2) by means of parameter 111.
!
Determine minimum speed (n10) by means of parameter 117.
!
Set parameter 126 to “3“.
!
Call parameter 188.
!
Press the
E
key.
"
!
Press the
F2
key.
"
!
Set high lift for walking foot (potentiometer on the machine) to the level up to which full speed is to be maintained
(upper break point).
!
New value of
AB
is taken over to
XX
.
"
!
Set high lift for walking foot (potentiometer on the machine) to the level from which minimum speed is to be effective
(lower break point).
!
New value of
AB
is taken over to
YY
.
"
!
Press
P
key once
"
Actual parameter is displayed. / Press
P
key twice
"
Exit programming.
ZZZZ XX AB YY
E
F–188 hP [ ° ]
F2
ZZZZ XX AB YY
E
ZZZZ
XX
AB YY
E
ZZZZ XX
AB
YY
