EDNord QMS magicolor WX User Manual Download Page 68

Page: 68 / 248

Configuring the

Windows NT 4.0

Printer Driver

QMS magicolor WX User's Guide

2-28

Dark Picture

Negative

Black Ref. and White Ref.

Black Ref. and White Ref. work together.

Purpose

Adjusts images that are too dark.

Choices

Unchecked—Does not adjust image.

Checked—Lightens the colors in the image.

Default

Unchecked

Notes

Adjusting for overexposure can restore details lost due to a
lack of contrast.

Purpose

Sets image to positive or negative.

Choices

Unchecked—Does not adjust Image.

Checked—Inverts the colors in the image.

Default

Unchecked

Notes

Setting the image to negative inverts the colors in the image.

Purpose

Sets the range between the darkest and lightest reference
points in the image.

Range

Black Ref.—0.000 (less black) to 0.400 (more black)

White Ref.—0.600 (more white) to 1.000 (less white)

Default

Black Ref.—0.000

White Ref.—1.000

Notes

Increasing the value of the black reference point and
decreasing the value of the white reference point increases
contrast but narrows the range of midtones.

EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500

Summary of Contents for QMS magicolor WX

























































































































































































































































Search results

Summary of Contents for QMS magicolor WX

Reviews:

Related manuals for QMS magicolor WX

Brands by name

Popular brands

EDNord QMS magicolor WX, User Manual

Search results

Summary of Contents for QMS magicolor WX

Reviews:

Related manuals for QMS magicolor WX

Brands by name

Popular brands