EDNord QMS magicolor WX User Manual Download Page 14

Page: 14 / 248

Unpack the

QMS magicolor WX User

’

s Guide

1-4

Unpack the Printer

WARNING!

The printer weighs approximately 106 lbs (48 kg) without

consumables. Do not attempt to lift the printer by yourself.

ACHTUNG!

Der Drucker hat ein Gewicht von ungefähr 48 kg. Bitte

versuchen Sie niemals, den Drucker alleine anzuheben oder zu
transportieren.

▲

Caution:

To prevent damaging your printer, you must remove all

packing materials (explained below) before turning it on.

Remove everything except the printer from the shipping car-
ton (leave the plastic and the straps on the printer), then lift
off the box.

Note:

Store all of the packing materials where you can easily access

them if you ever need to relocate the printer or return it for service.

EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500

Summary of Contents for QMS magicolor WX

























































































































































































































































Search results

Summary of Contents for QMS magicolor WX

Reviews:

Related manuals for QMS magicolor WX

Brands by name

Popular brands

EDNord QMS magicolor WX, User Manual

Search results

Summary of Contents for QMS magicolor WX

Reviews:

Related manuals for QMS magicolor WX

Brands by name

Popular brands