EDNord QMS magicolor WX User Manual Download Page 93 | Manualshive

Page: 93 / 248

background image

More About

Print Media

2-53

Printing

About Imageable Regions and Margins

The imageable region of each media size is smaller than the size of
the media. The imageable region is subject to hardware limits (physi-
cal page size and margins required by the print engine). As you set
page margins in your application, remember they must be equal to or
less than the imageable regions specified for the page size you’re
using. “Print Media Sizes, Imageable Regions, and Margins” on page
2-51 lists measurements of imageable regions and margins for each
media size.

About Legal-Size Imageable Regions

There are two imageable regions for legal-sized pages: one for black
and one for color. The imageable region for black on legal-sized
pages is 8.11" x 13.61" (205.90 mm x 345.60 mm). The imageable
region for color on legal-sized pages is an 8.11" x 11.7" (205.90 mm x
297.18 mm) region at the top of the page. We recommend that you
compose color legal-sized pages so that color images stay in this
8.11" x 11.7" area near the top of the page, and use the imageable
region below this for black only.

Working Within Imageable Regions and Margins

If you experience problems with your file being cut off (not printing to
the expected margins), it might be due to an imageable region con-
straint. To compensate for imageable region constraints, use a larger
page size or adjust margins, page size, or scale through your applica-
tion.

EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500

«
...
91
92
93
94
95
...
»

Summary of Contents for QMS magicolor WX

























































































































































































































































Reviews:

No comments

Related manuals for QMS magicolor WX

Brand: B9Creations Pages: 25

Brand: Oki Pages: 24

Brand: Xerox Pages: 16

Brand: Xerox Pages: 2

Brand: Xerox Pages: 2

Brand: QMS Pages: 180

Brand: Xerox Pages: 8

Brand: A&D Pages: 32

Brand: TP-Link Pages: 16

Brand: A&D Pages: 66

Falcon Outdoor 46

Brand: MUTOH Pages: 333

Brand: Ricoh Pages: 130

7400DN - Phaser Color LED Printer

Brand: Xerox Pages: 3

Brand: Epson Stylus Pages: 2

Brand: Citizen Pages: 32

VersaLink C9000

Brand: Xerox Pages: 255

imagePRESS C10010VP

Brand: Canon Pages: 40

imagePRESS C6010

Brand: Canon Pages: 74

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands