EDNord QMS magicolor WX, User Manual

Page: 12 / 248

Introduction
QMS magicolor WX User
’
s Guide 1-2
Introduction
The QMS
magicolor WX Print System uses advanced color laser
technology to produce 300 and 600 dpi color and monochrome docu-
ments from PCs using Windows 95 or Windows NT. This chapter
explains how to set up your QMS
magicolor WX Print System for the
first time and install the printer driver for either Windows 95 or Win-
dows NT.
Find a Good Location
Use the following guidelines when selecting a location for your printer:
n
On a hard, level, sturdy surface capable of supporting 106 lbs
(48 kg). (By “level” we mean the surface should be so flat–1° of
slant or less–that you can lay a round pencil down on it, and it
doesn’t roll in any direction.)
n
In an area with a moderate temperature and humidity (64°-81° F /
18°-27° C, 60%-70% relative humidity).
n
Away from cooling sources, heating sources, extreme tempera-
ture changes, direct sunlight, excessive dust, corrosive chemi-
cals, strong electromagnetic fields (such as that created by an air
conditioner) and excessive vibration. Don’t connect it to the same
electrical outlet as noise-generating equipment.
n
Near an electrical outlet (grounded and surge-protected,
120 volts/
±
12 volts, 60 Hz/
±
2 Hz).
n
Near the PC—6' (1.8 m) or less for parallel connection.
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500