Edge PresencePlus P4, User Manual

Page: 53 / 182

01/05
P/N 120413
45
User’s Manual Setup
Banner Engineering Corp. • Minneapolis, MN USA
www.bannerengineering.com • Tel: 763.544.3164
Input/Output Electrical Selection
All inputs and outputs can be selected as either NPN (current sinking) or PNP (current sourcing). This selection is made in the
System Setup window on the
InputOutput tab, which is shown in Electrical Selection (in Section 3, Installation ) on page 13.
---------------------------------------------------------------------------
Timing Diagram
Polarity is illustrated in the Timing Diagram below.
----------------------------------------------------------------------------
Timing Diagram: Leading-Edge and Trailing-Edge Trigger Inputs
Trailing-Edge PNP Configuration
Leading-Edge NPN Configuration Trailing-Edge NPN Configuration
Trigger Delay
Trigger Delay
Trigger Delay
Trigger Delay
Minimum Pulse Width
1-8,000 ms
Minimum Pulse Width
1-8,000 ms
Minimum Pulse Width
1-8,000 ms
Minimum Pulse Width
1-8,000 ms
ON
Inspection
OFF
Idle
OFF
Inspection
ON
Idle
ON
Inspection
OFF
Idle
OFF
Inspection
ON
Input Trigger Signal
Input Trigger Signal
Input Trigger Signal
Input Trigger Signal
Idle
Leading-Edge PNP Configuration Leading-Edge PNP Configuration