Edge PresencePlus P4, User Manual

Page: 52 / 182

44
P/N 120413
01/05
Setup PresencePLUS ® P4 EDGE
Banner Engineering Corp. • Minneapolis, MN USA
www.bannerengineering.com • Tel: 763.544.3164
Setting Trigger Parameters
An external trigger is used to tell the Sensor when to capture an image. Set the parameters in the Trigger tab of the Setup
window.
-------------------------------------------------------------------------------------------
Trigger Setup Screen
-------------------------------
Trigger parameters shown in the Trigger tab are stored in the inspection file and can be different for each inspection.
-----------------------------------------------
Polarity
Choose Leading Edge to capture images at the leading edge of the
trigger signal. Choose Trailing Edge to capture images at the trailing
edge of the trigger signal.
Display Resolution
Image window display resolution is a system-wide parameter
and remains the same for all inspections. Resolution can be set
in all Setup and Run screens. See
Resolution
(in
Section 11,
Run
) on page 128.
NOTE: The resolution setting does not affect the image
captured by the Sensor.
Trigger Setup screen