Edge PresencePlus P4, User Manual

Page: 56 / 182

48
P/N 120413
01/05
Tools Screen PresencePLUS ® P4 EDGE
Banner Engineering Corp. • Minneapolis, MN USA
www.bannerengineering.com • Tel: 763.544.3164
Typical Build/Modify Procedure
Establishing an Inspection
Using the Tools screen, shown below, the user establishes the inspections that the Sensor will execute. Three sources of
inspections are available:
1. Building an inspection from scratch is the typical method of establishing an inspection. The Tools screen supports this
inspection organization and is designed to aid the user in building an inspection.
For detailed explanations of the tools, see
Section 7, Tools beginning on page 57.
2. Existing inspections can be obtained from the Sensor (with or without the reference image) for execution or
modification. This method is very useful if the user has an existing inspection on the Sensor and needs to make
modifications to establish a new inspection.
3. Existing inspections also can be obtained from host resources using the Library . In this case, the sources of the
inspections are the host’s hard drive or network resources. This method provides access to an unlimited number of existing
inspections for execution or modification.
-------------------------------------------------------------------------------------------------
Tools Screen