Edge PresencePlus P4, User Manual

Page: 24 / 182

16
P/N 120413
01/05
Installation PresencePLUS
®
P4 EDGE
Banner Engineering Corp. • Minneapolis, MN USA
www.bannerengineering.com • Tel: 763.544.3164
Programmable I/O, Pins 5 through 8
The Sensor provides four discrete programmable I/O connections as listed in the table below. Each I/O type can be configured
as follows:
•
Input current sinking mode (external PNP driver, default) or input current sourcing mode (external NPN driver), and
•
Output current sinking mode (NPN) or output current sourcing mode (PNP).
----------------------------------------------------
----------------------------------------------------
------------------------------------------------------
Typical PNP and NPN connections are shown below. See also the Programmable Input and Output Specifications table below.
----------------------------------------------------------
----------------------------------
----------------------------------
-------------------------------------------------------------------
-------------------------------------------------------------------
Pin 5 (Black Wire) I/O #1
Pin 6 (Red Wire) I/O #2
Pin 7 (White Wire) I/O #3
Pin 8 (Light Blue Wire) I/O #4
Programmable Input and Output Specifications
Programmable Input Specifications Current Sinking (NPN) Current Sourcing (PNP)
ON < 2V at 1 mA max. > 8V at –7.5 mA max.
OFF-State Voltage > 10V at 4 mA max. < 2V at –7.5 mA max.
Programmable Output Specifications
(150 mA Max. Each Output) Current Sinking (NPN) Current Sourcing (PNP)
ON < 2V at 1 mA max. > 8V at –7.5 mA max.
OFF-State Voltage > 10V at 4 mA max. < 2V at –7.5 mA max.
PNP NPN
10–30V dc
10–30V dc
Load Load