Edge PresencePlus P4, User Manual

Page: 125 / 182

01/05
P/N 120413
117
User’s Manual Teach
Banner Engineering Corp. • Minneapolis, MN USA
www.bannerengineering.com • Tel: 763.544.3164
Teaching an Inspection
Teaching on a number of known good samples finds acceptable variations and automatically sets the judgment tolerances to
accommodate the full range of acceptable results.
Several Teach parameters may be selected in the Teach Tool tab, such as how many images to consider during a teaching
session and what type of captured images to display.
-----------------------------------------------------------------------------------------
Teach Tool Tab
Sample Size (default: All)
-
Use All to not limit the Teach sample size.
- Use Count to have the Sensor automatically stop the Teach process after a set
number of samples.
Use the Count option when there is a known sample set size. Use the arrows to
increase or decrease the sample size. When the sample size is reached, the
Sensor will stop the Teach process, and the Start/Stop button will return to
displaying Start .
Trigger (default: External)
The Sensor must receive an external trigger (Pin 3) to accept a sample.
To teach an inspection:
Set preferences from the various Teach options, and click the
Start button.
The Start button turns into a button after it is
clicked.
Options are explained in the following table.
To stop teaching an inspection:
Click the Stop button.