Edge PresencePlus P4, User Manual, Page: 62 / 182

54
P/N 120413
01/05
Tools Screen PresencePLUS ® P4 EDGE
Banner Engineering Corp. • Minneapolis, MN USA
www.bannerengineering.com • Tel: 763.544.3164
To Move, Edit, or Delete an ROI
Clicking on the tool in the Navigation window selects an ROI so it can be moved, edited, or deleted. Selection points indicate that the ROI is
active.
---------------------------------------------------------
---------------------------------------------------------------------------------------------
Quick Teach
Quick Teach provides the fastest and easiest method of establishing an inspection. Quick Teach will use the reference image to
establish Pass/Fail parameters of the Test tools.
For more information on Teach and Quick Teach, see Teach Overview (in Section 9, Teach ) on page 114.
Quick Teach does the following:
•
Executes the inspection on the reference image.
•
“Learns” the results of the Vision tools.
•
Applies the applicable tolerances (user-determined, but default is 10%) to the selected parameters in the Test tool (these
parameters determine the Pass/Fail criteria for each Test tool within the inspection).
NOTE: Quick Teach will overwrite any manually-entered minimum and maximum parameter values in the Test tool.
---------------------------------------------------------
Click Quick Teach to:
•
Run all the tools.
•
Calculate the measurements.
•
Add a percentage of tolerance around taught values.
•
Save the inspection to the Sensor.
•
Go to Run.
To Move an ROI
1. Select the ROI, then hover the cursor inside it.
2. When the mouse cursor turns into a four-way arrow, drag the
ROI to its new position.
------------------------------
To Edit an ROI
1. Hover the cursor over an end of the ROI. When the cursor turns
into an arrow, indicating that the ROI can be rotated, click and
drag.
2. Release the mouse button to release the ROI.
------------------------------
NOTE: When editing a Linear ROI, its length and position can be
changed. The width can be manually entered in the tool’s
Input tab.
----------
To Delete an ROI
Select the ROI, then click on Delete to delete it.