01/05
P/N 120413
i
Banner Engineering Corp.
• Minneapolis, MN USA
www.bannerengineering.com • Tel: 763.544.3164
Warnings and Cautions
Read all warnings and cautions in this section before working with the PresencePLUS P4 system (also referred to as
the
Sensor
).
------------------------------
------------------------------
Observe the following warnings to avoid personal injury:
•
Never use the Sensor as a sensing device for personnel protection. Such use could create an unsafe condition that could
lead to serious bodily injury or death.
•
Before connecting or disconnecting any cables, be sure the power supply is OFF.
------------------------------
------------------------------
Observe the following cautions to avoid damage to the Sensor:
•
Never connect the Sensor to a power source other than 10–30V dc.
•
Keep components at least 250 mm (10
"
) away from power cables.
•
Keep components away from high-voltage power sources and motors.
------------------------------------------
----------------------------------------------------------------------
Avoid the damage that electrostatic discharge (ESD) can cause to the Sensor.
Always use a proven method for preventing electrostatic discharge when installing a lens or attaching a cable.
---------------------------------------------------------------
-----------------------------------------------------------------
The Sensor has no field-replaceable or user-serviceable components.
To avoid invalidating the Banner warranty, do not disassemble or make electrical or mechanical modifications to any
components.
-----------------------------------------------------------------
-----------------------------------------------------------------
For reliable operation, the installation location must meet the following criteria:
•
Stable ambient temperature: 0° to +50° C (+32° to 122° F)
•
Ambient relative humidity: 35% to 90%, non-condensing
•
Stable ambient lighting: no large, quick changes in light level; no direct or reflected sunlight
•
No excessive vibration or mechanical shock
•
No contact with corrosive or volatile materials or atmosphere
•
No liquid splash
•
Minimal dust or dirt
Safety Warnings
Cautions
Electrostatic Discharge Caution
User Service Caution
Environmental Requirements
Summary of Contents for PresencePlus P4
