BDL162
LocoNet Occupancy Detector
For 16 Detection Sections
FFeeaattuurreess
n
Occupancy Detection for 16 detection sections lets you know when rolling
stock is in a detection section on your layout
n
Outputs for LEDs to indicate local detection section occupancy and zone
power status on a panel mount display
n
3 Amp capacity per detection section
n
Connect to LocoNet to transmit occupancy information to your LocoNet
system
n
Detects any powered locomotive
n
Detects un-powered rolling stock equipped with resistor wheel sets
n
Plug and Play with Digitrax DCC
n
Configurable for most DCC systems
n
Automatically checks layout status on power up of your system computer
n
Transponding with addition of an RX4 Transponder Detector and transpon-
ders in your rolling stock provides additional capabilities:
Identify where specific rolling stock is on your layout
Operations Mode Read Back allows you to read CV values of decoders
equipped with transponders
PPaarrttss
LLiisstt
1 BDL162 1 LT5
Tester
1 44-Pin Connector
1 Instruction Manual
The BDL162 requires a 12V-16V AC or DC power supply which is sold sepa-
rately. Multiple BDL162s can be powered from the same power supply as long
as 100mA is provided for each BDL162. One Digitrax PS12 power supply can
run up to three BDL162s.
Digitrax Manuals and Instructions are updated periodically.
Please visit www.digitrax.com for the latest version of all manuals.
©2002 Digitrax, Inc
www.digitrax.com
D
D
iiggiittrraaxx
C
C
oom
mm
maanndd
C
C
oonnttrrooll
RRuunn
YYoouurr
TTrraaiinnss,,
N
Noott
YYoouurr
TTrraacckk!!
