793
22.3 Commands for cluster
22.3.1 cluster run
Command:cluster run
no cluster run
Function:
Enable cluster function; the “
no cluster run
” command disables cluster
function.
Command mode:
Global Mode
Default:
Cluster function is disabled by default.
Instructions:
This command enables cluster function. Cluster function has to be enabled
before implementing any other cluster commands. The “
no cluster run
” disables cluster
function.
Example:
Disable cluster function in the local switch.
Switch (Config)#no cluster run
22.3.2 cluster register timer
Command:cluster register timer<time-value>
no cluster register timer
Function:
Sets interval of sending cluster register packet; the “
no cluster register
Command Explanation
Admin Mode
rcommand member <mem-id>
In the commander switch, this
command is used to configure and
manage member switches.
rcommand commander
In the member switch, this command is
used to configure the member switch
itself.
cluster reset member<mem-id>
In the commander switch, this
command is used to reset the member
switch.
cluster update member <mem-id>
<src-url> <dst-url> [ascii | binary]
In the commander switch, this
command is used to remotely upgrade
the member switch.
