685
Switch#1970/01/01 07:33:12 IMI: Recv MLD packet
1970/01/01 07:33:12 IMI: Type: Listener Report (131)
1970/01/01 07:33:12 IMI: Code: 0
1970/01/01 07:33:12 IMI: Checksum: 3b7a
1970/01/01 07:33:12 IMI: Max Resp Delay: 0
1970/01/01 07:33:12 IMI: Reserved: 0
1970/01/01 07:33:12 IMI: Multicast Address: ff1e::1:3
1970/01/01 07:33:12 IMI: MLD Report recv: src fe80::203:fff:fe12:3457 for ff1e::1:3
1970/01/01 07:33:12 IMI: Processing Report comes from Vlan1, ifindex 2003
1970/01/01 07:33:12 IMI: MLD(Querier) ff1e::1:3 (Vlan1): Listeners Present --> Listeners
Present
17.3.5.1.3 show ipv6 mld groups
Command: show ipv6 mld groups
[{<ifname | group_addr>}]
Function:
Display the MLD group information
Parameter: <ifname>
is the name of the interface . Display the MLD group information.
<group_addr>
is the group address. Display the specified group
information.
Default:
Do not display
Command Mode:
Admin Mode
Example:
Switch#sh ipv6 mld group
MLD Connected Group Membership
Group Address Interface Uptime Expires
ff1e::1:3 Vlan1 00:00:16 00:03:14
Switch#
Displayed Information
Explanations
Group Address
Multicast group IP address
Interface The
interface of multicast group
Uptime
The existing time of the multicast group
Expires
The left time to overtime
17.3.5.1.4 show ipv6 mld interface
Command:
show ipv6 mld interface [<
ifname>
]
Function:
Display the relevant MLD information of an interface
Parameter: <ifname>
is the name of the interface . Display the MLD information of a
specific interface.
Default:
Do not display
Command Mode:
Admin Mode